Multiple Magnetic Heating Stirrers are ideal and easy to use.
Release Time:2021-03-09


Multi-connected magnetic heating stirrer with good performance, low noise, stirring effect is obvious, is the ideal necessary tool for laboratory laboratory personnel. It can be used for long-term heating. Stirrer refined by polytetrafluoroethylene and magnet steel, high temperature resistant, wear-resistant, chemical corrosion-resistant, strong magnetism. It is ideal and convenient for mixing in closed containers.

Magnetic Stirrer with Heating is mainly used for stirring or heating at the same time to stir low viscosity liquid or solid-liquid mixture. The basic principle is to utilize the principle of repulsion and attraction of magnetic field, and use the magnetic field to push the magnetic stirrer placed in the container to carry out Circumference operation, so as to achieve the purpose of stirring the liquid. With the heating and temperature control system, the temperature of the sample can be heated and regulated according to the specific experimental requirements to maintain the temperature conditions necessary for the experimental conditions and ensure that the liquid mixing meets the experimental requirements.

How to use

When using this instrument, first of all, please check whether the Accessories with the machine is complete, and then in order to first install the fixture, the beaker to be stirred in the middle of the plated branding plate, add the solution to put the stirrer on the beaker solution, and then plug the instrument plugged into the power plug, and then turn on the power to open the power switch, the indicator is bright, that is, to start working, the speed of speed regulation is gradually adjusted to high speed by the low-speed, do not allow the High-speed gear directly start, so as not to stir the sub-synchronization, caused by jumping. Temperature control to the probe number inserted into the socket, set the temperature control knob to the desired temperature can be, do not work should cut off the power supply, in order to ensure safety, please connect the ground wire when using. The instrument should be kept clean and dry, it is strictly prohibited to enter the solution into the machine, so as not to damage the machine parts, to prevent violent vibration.

Contact Us

Tel:+86-21-59118652 |

Add:Building 2, Nanxiang Zhidi III, No.1101 Huyi Highway, Nanxiang Town, Jiading District, Shanghai, China

Copyright © Smcon Lab all rights reserved Support:Raise

法律申明 | 版权隐私 | 网站地图 |