SDBI10
SDBI10
Dry Bath Incubators
SDBI10 is a high-performance Dry Bath Incubator that combines microcomputer control with semiconductor refrigeration technology, utilizing high-purity aluminum material as the heat-conducting medium to replace the traditional water bath device. With the features of easy to use, high precision, small volume and large Temperature Range, it is widely used for sample preservation and reaction, DNA amplification and pre-denaturation of electrophoresis, serum coagulation and so on.
Technical Data
Products SDBI10 Multicast Operation Support (up to 5 points)
Temperature Setting Range -10℃ ~100℃ Multi-point cyclic operation Supported (max. 99 cycles)
Temperature Range Below Room Temperature 30℃ ~100℃ Automatic Preheating Supports
Time Setting 1min~99h59min/ ∞ Boot up Automatically Supports
Temperature Control Accuracy ≤ ±0.3℃ Automatic Recovery from Power Failure Supports
Display Accuracy 0.1℃ Sample Quantification See Module Selection Chart
Temperature Uniformity ≤ ±0.3℃ Power Supply 150W
Warming Time ≤ 10 min(25℃ - 100℃) Input Power AC110V~220V/50-60HZ
Cooling rate1 ≤ 10 min (100℃- 25℃) Fuse 250V 3A Ф5×20
Cooling Speed2 ≤ 25 min(Room temperature reduced to below room temperature 30℃) Dimension (W×D×H) 260x195x150 mm
End of run 4°C storage Supports Weight 4.5Kg
Products-Accessory
Contact Us

Tel:+86-21-59118652 | E-mail:info@smconlab.com

Add:Building 2, Nanxiang Zhidi III, No.1101 Huyi Highway, Nanxiang Town, Jiading District, Shanghai, China

Copyright © Smcon Lab all rights reserved Support:Raise

法律申明 | 版权隐私 | 网站地图 |